🌿 Eco By Design
Natural, eco-friendly
decorating materials!
Lino Corkoleum Warranty
Lifetime Residential Manufacture Warranty
5 Year Light/Medium Commercial Wear ManufactureWarranty
Lifetime Residential Manufacture Warranty
Lifetime Limited Residential Wear Warranty
The finish of the floor plank is warranted by the manufacture not to wear through under normal use for the
life of the product. Finish wear-through is defined as 100% finish removal over a minimum of 3% of the
total installation. (Gloss reduction or surface scratches are not considered surface wear.) Dull finish can
be corrected with spot or overall recoating care systems.
This lifetime limited residential wear warranty is made subject to the following conditions:
1. The floor must be installed properly and according to the manufacture installation instructions. Proper
installation includes, but is not limited to the following:
a. A moisture test must be performed to determine if excessive moisture exists in the
subfloor.
b. When installing over concrete, a calcium chloride moisture test must be performed.
Readings greater than 5 lbs./1000 sq. ft./24 hours are unacceptable for installation. If a
moisture meter is used, a reading greater than 4.5% is unacceptable.
c. A polyethylene film vapor barrier must not be used over wood subfloors. Moisture
readings of wood subfloors must not exceed 14% throughout the entire installation.
d. If glue is used, glue entire floor with glue that meets or exceeds PVAC dispersion with a
viscosity of 8000 +/- 1000 cpc spindle 6/20 at 20 degrees centigrade – density of 1.11
=/- 0.02 g/cm on a dry content of 48 =/- 1% (weight). Upon completion of glued
installation, the floor must be allowed to set overnight for 12 hours before resuming
normal usage of the room.
2. The flooring must be used only indoors in a dry, climate controlled area.
3. The flooring must be maintained in accordance with the manufacture maintenance instructions.
4. This limited warranty does not apply to water damage of any kind.
5. This limited warranty does not apply to damage caused by water or moisture in the subfloor or
underneath the flooring, including but not limited to damage from subfloor hydrostatic pressure
(water or moisture under the floor that is transmitted to the surface through exerted pressure) or
other conditions that result in water or moisture being under the floor.
6. This limited warranty does not apply to the manufacture moldings and trims.
7. Installation of flooring that contains any manufacturing defect is not covered by this limited
warranty.
Lifetime Limited Structure Warranty
The floor plank is warranted to be free from manufacturing or material defects for the life of the product.
Should a defect occur, the manufacture will arrange a credit based on the original purchase of the product. This
warranty is not transferable by the purchaser of the floor.
Should a defect occur, we will arrange a refund based on the original purchase of the product. This
warranty is not transferable by the purchaser of the floor.
Should a problem attributable as amanufacturing defect develop after flooring is installed, the cost of labor for repair will be covered by this
warranty.
Warranty Coverage: Upon determination of a valid manufacturing defect, credit will be issued to the
dealer and will be good toward the purchase of a replacement. When defective product is installed, credit
applies to material only and does not include labor since it is the responsibility of the installer to
determine suitability of material prior to installation.
Should a problem attributable as a manufacturing defect develops after flooring is installed, the cost of
labor for repair will be covered by this warranty.
Limited Residential Wear Warranty does not cover:
1. Problems due to moisture, mildew, alkaline substances, hydrostatic pressure, expansion and
contraction between planks, or humidity levels above or below those recommended.
2. Abuse or misuse. This warranty does not cover damage caused by neglect, abnormal use or
misuse, application of solvents, corrosives or other chemicals to the flooring, color change,
excessive pivot and point-loads, stiletto shoes, heavy furniture or equipment, unpadded furniture
feet, water, pet claws, pet urine, damage from sand, pebbles or other abrasives, damage due to
adhesives or tape or other unintended uses. Loss of finish gloss over time is consistent with
normal wear & tear and is not a product flaw.
3. It is normal and expected for there to be color variations due to use of natural components,
exposure to UV light and/or sunlight, and age of material.
Therefore, color inconsistency betweensamples, replacement product or illustrations and actual product is not a manufacturing flaw.
Area rugs and large furniture will block light exposure and cause uneven coloration. To minimize
this, furnishings and floor coverings should be moved periodically.
4. The manufacture and retailer makes no guarantee that the material purchased will match or coordinate with customer
furnishings, trim, cabinetry, railings, etc.
5. Inherent variations that are consistent with those of a natural bamboo product to include pattern,
color, and grain do not indicate defective material.
6. Noncompliance with installation instructions and maintenance instructions as recommended by
the manufacture. The manufacture and retailer cannot assume responsibility for the suitability of flooring material and
accompanying products for each individual installation as the manufacture and retailer has no control over the
installer's proper application.
7. Floor covering installed in inappropriate locations is excluded from this warranty.
8. Water damages due to flooding, broken pipes, wet mopping and spillages are not covered by this
warranty.
How to Make a Claim
Any claim made under either of these limited warranties must be made by contacting your retailer within
30 days after the basis of the claim is detected. In addition, any claim under either of these limited
warranties must be made before the end of the applicable limited warranty period. Proof of purchase
including the date of purchase, must be presented to make a claim.
5 Year Limited Light/Medium
Commercial Wear Warranty
The finish of the floor plank is warranted by the manufacture not to wear through under normal light and
medium commercial use for a period of five (5) years from the date of purchase. Finish wear-through is
defined as 100% finish removal over a minimum of 3% of the total installation. (Gloss reduction or
surface scratches are not considered surface wear.) Dull finish can be corrected with spot or overall
recoating care systems. This warranty is non-transferable and applies only to the original purchaser and
only if used in the following commercial areas:
• Retail: Novelty Shops/Boutiques, Product Display Areas, Sales Floors, Showrooms, Hair Salons
• Medical Offices: Waiting Rooms, Patient Rooms, Examination Rooms, Storage Rooms
• Hotels: Guest Rooms, Conference/Meeting Rooms
• Offices and Restaurants: Offices, Conference/Meeting Rooms, Showrooms, Restaurant Floor,
Break Rooms
• Institutional and Light Industrial: Classrooms, Training Rooms, Meeting Rooms, Commons Areas,
Residence Halls
This 5 year limited light/medium commercial wear warranty is made subject to the following conditions:
1. The floor must be installed properly and according to the manufacture's installation instructions. Proper
installation includes, but is not limited to the following:
a. A moisture test must be performed to determine if excessive moisture exists in the
subfloor.
b. When installing over concrete, a calcium chloride moisture test must be performed.
Readings greater than 5 lbs./1000 sq. ft./24 hours are unacceptable for installation. If a
moisture meter is used, a reading greater than 4.5% is unacceptable.
c. A polyethylene film vapor barrier must not be used over wood subfloors. Moisture
readings of wood subfloors must not exceed 14% throughout the entire installation.
d. If glue is used, glue entire floor with glue that meets or exceeds PVAC dispersion with a
viscosity of 8000 +/- 1000 cpc spindle 6/20 at 20 degrees centigrade – density of 1.11
=/- 0.02 g/cm on a dry content of 48 =/- 1% (weight). Upon completion of glued
installation, the floor must be allowed to set overnight for 12 hours before resuming
normal usage of the room.
2. The flooring must be used only indoors in a dry, climate controlled area.
3. The flooring must be maintained in accordance with manufacture's maintenance instructions.
4. This limited warranty does not apply to water damage of any kind.
5. This limited warranty does not apply to damage caused by water or moisture in the subfloor or
underneath the flooring, including but not limited to damage from subfloor hydrostatic pressure
(water or moisture under the floor that is transmitted to the surface through exerted pressure) or
other conditions that result in water or moisture being under the floor.
6. This limited warranty does not apply to the manufacture's moldings and trims.
7. Installation of flooring that contains any manufacturing defect is not covered by this limited
warranty.
Lifetime Limited Structure Warranty
The floor plank is warranted to be free from manufacturing or material defects for the life of the product.
Should a defect occur, the manufacture will arrange a credit based on the original purchase of the product. This
warranty is not transferable by the purchaser of the floor.
Should a defect occur, we will arrange a refund based on the original purchase of the product. This
warranty is not transferable by the purchaser of the floor.
Should a problem attributable as amanufacturing defect develop after flooring is installed, the cost of labor for repair will be covered by this
warranty.
Warranty Coverage: Upon determination of a valid manufacturing defect or finish wear through
amounting to 100%, credit will be issued to the dealer and will be good toward the purchase of a
replacement. When defective product is installed, credit applies to material only and does not include
labor since it is the responsibility of the installer to determine suitability of material prior to installation.
Should a problem attributable as a manufacturing defect develops after flooring is installed, the cost of
labor for repair will be covered by this warranty.
The Limited Commercial Wear Warranty does not cover:
1. Damage due to adhesives or tape, scratches, gouges, scuffs, punctures, cuts, indentations,
burns, accidents, lack of proper furniture rests or any intentional misuse of the product. Loss of
finish gloss over time is consistent with normal wear & tear and is not a product flaw.
2. Problems due to moisture, mildew, alkaline substances, hydrostatic pressure, expansion and
contraction between planks/tiles, or humidity levels above or below those recommended.
3. It is normal and expected for there to be color variations due to use of natural components,
exposure to UV light and/or sunlight, and age of material.
Therefore, color inconsistency betweensamples, replacement product or illustrations and actual product is not a manufacturing flaw.
4. Manufacturer makes no guarantee that Natural Cork products will match or coordinate with
customer furnishings, trim, cabinetry, railings, etc.
5. Inherent variations that are consistent with those of a natural cork product to include pattern,
color, and granule size do not indicate defective material.
6. Noncompliance with installation instructions and maintenance guidelines as recommended by
the manufacture. Manufacturer and retailer cannot assume responsibility for the suitability of flooring material
and accompanying products for each individual installation as manufacturer has no control over
the installer's proper application. Should an individual piece be doubtful as to appearance or
dimension the installer should not use this piece. Failure to apply protective coating in
accordance with manufacturer’s guidelines may result in irreparable damage to the cork. Such
damage is not covered.
7. Cracking, warping, soiling, fading, improper maintenance or abuse caused by items such as roller
skates, golf shoes or pets.
8. Floor covering installed in inappropriate locations is excluded from this warranty.
9. Exposure to UV light and sunlight will cause discoloration to natural wood products. This is
normal and is not a manufacturing flaw. Area rugs and large furniture will block light exposure
and cause uneven coloration. To minimize this, furnishings and floor coverings should be moved
periodically.
How to Make a Claim
Any claim made under either of these limited warranties must be made by contacting your retailer within
30 days after the basis of the claim is detected. In addition, any claim under either of these limited
warranties must be made before the end of the applicable limited warranty period. Proof of purchase
including the date of purchase, must be presented to make a claim.