Natural Cork Wall Tiles
|
 Cork
Wall Covering Tiles.
The beauty,
durability and stable properties of cork have been recognized throughout
the centuries, perfect if you are constructing a creative or an active
space. Cork is a pure material that neither outgases nor
sheds micro fibers thus improving indoor air quality. The acoustical
properties of Cork will also dampen sound creating a more intimate space.
Cork's natural beauty is strikingly elegant and sophisticated while
remaining reasonably priced.
Cork Wall Tiles are not to be used
for bulletin board use. They are not thick enough. For bulletin boards,
please see the
cork underlayment.
|
NOTE: The manufacture has stopped making this
item due to the slow down in the economy and recommends using
the
Cork Parquet Tiles instead, which are
designed for use on the floor but can also be used as wall
tiles. They are installed the same way as the wall tiles.
|
|
| Installation Guidelines |
|
Responsibility for the suitability of cork Wall Tile or
the adhesive for each individual case cannot be assumed
by EcoPlanet or the manufacture. Since we have no
influence on the installer’s proper application. Should
an individual Wall Tile be doubtful as to appearance or
dimension the installer should not use this piece. The
manufacture will send a replacement in a timely manner.
Installation
It is important for cork to acclimate. Therefore,
cartons of cork Wall Tiles should be stored out of their
packaging at the job site for a minimum of 72-hours
prior to installation. During storage and installation,
maintain temperature and relative humidity to a level
that is consistent to the conditions that will prevail
when the building is occupied. Heating or air
conditioning should be used for an appropriate length of
time prior and during installation. With improper
acclimation, tiles could expand or contract excessively
after installation.
Cork is a natural
product. Just like wood, cork tile will vary in shade or
pattern definition. Cork is subject to the normal
behavior of expansion during periods of high humidity
and contraction during periods of low humidity (usually
the heating season). With cork, visible signs of
expansion and contraction can be kept to a minimum by
stabilizing the building through temperature and
humidity control, allowing for proper acclimatization of
the product prior to installation, and priming the
substrate with a compatible color (black or brown).
APPLICATION OF ADHESIVE: Pour some
adhesive into clean paint roller tray. Using short-nap
roller, apply a thin coat of adhesive on approximately
50 square feet at a time. A uniform, glossy film
indicates sufficient amount of adhesive. Adhesive will
dry in 20 to 30 minutes under normal temperature and
humidity conditions. Always test for proper adhesion
prior to proceeding with the installation. If the tiles
do not seem to adhere properly over a very porous
substrate, it will be necessary to apply a second coat
of adhesive.
Finishing
Wall Tile is protected with a factory wax finish. No
other finishing is required. Wall Tiles cannot be
stained.
Installation
|
|
Care Instructions: The wall
tiles are finished with a wax film. Very little
maintenance is required to preserve the beauty of your
cork wall covering. Dust can be removed with a brush
attachment on a vacuum cleaner. Soiled areas may be spot
cleaned with a mild detergent on a slightly dampened
clean cloth. Do not rub with excessive force, rather
gently pat to lift soil from cork surface. |
|
|
*Prices & styles are subject to change without
notice. Minimum purchase of wall cork tiles is one pack. For carton
purchases, after orders are placed, a freight quote will be prepared and the
customer will be asked if the freight costs are ok. Customers are
responsible for all shipping costs.
